Metallic Steel Construction Hangar Shed

• Customization: Available
• Material: Q345b Steel
• Size: According to Customers′ Requirement
• Model NO.: kxd-t075
• Main Structure: Steel Structure -H Steel, Z or C Purlin
• Roof & Wall Material: Corrugated Steel Sheet/Sandwich Panel
• Connect Method: Welding or Bolt
• Color: Ral or Your Request
• Quality Control: SGS, BV, ISO
• Window: Aluminium Alloy or PVC
• Door: Sliding Door or Rolll up
• Service: Turnkey Solution
• Drawing Design: Autocad, Pkpm, Mts, 3D3s, Tarch, Tekla Structures
• Purlin: Galvanizd C Section Steel
• Structure Type: Light Portal Frame Structure
• Material Standard: GB
• Application: Steel Structure Platform, Steel Workshop, Structural Roofing, Steel Walkway and Floor, Steel Fabricated House, Frame Part, Steel Structure Bridge
• Type: H-Section Steel
• Standard: BS, ASTM, DIN, GB
• Forming: Hot-Rolled Steel
• Connection Form: Bolt Connection
• Member: Steel Column
• Type of Steel For Building Structure: High-Strength Steel
• Carbon Structural Steel: Q235
• Residential Wall Structure: Wall Stud
• Transport Package: Seaworthy Package
• Specification: ISO, SGS
• Trademark: Low-alloy High-tensile Structural Steel, KXD
• Origin: Qingdao, China
• HS Code: 9406900090
• Production Capacity: 2000ton/Month

Product Description

2019 new Prefabricated building Light Portal frame Structural Steel Structure Warehouse 

Our company mainly manufacture and fabricate steel workshop, steel warehouse, prefabricated house and container house. Our company has formed standard production lines will provide the turnkey solution service.2

1. Construction of Steel Frame Structure Foundation

Steel framed structure construction begins with the construction of foundation. Generally, the types of foundation required for the given structure is based on the soil bearing capacity.

Soil investigation including surface and subsurface exploration is used to assess the condition of soil on which steel frame structure rests.
For example, when moderate or low loads are imposed, then it is advised to use reinforced concrete bearing pads or strip foundation. These foundation types transfer loads to soil capable of supporting transferred loads.

Pay attention to the elevation of nuts and gaskets


2. Steel beams are installed after the construction of steel column tied rods is completed.


3. Roof purlin installation:

4.Installation of wall interior plate: The plate is parallel to the steel column, and the joint should not be too large. The self-tapping nail should be straight, the plate should be flat and straight, and the interval between the self-tapping nails should be the same.



Finished factory photo:



Here are several typical project case from our company for your reference.

Project 1: Steel Logistics steel structure Warehouse in Uzbekistan
1. The Main Steel Frame: Welded H section Steel with anti-rusting painting;
2. The Secondary Steel Frame (C purlin, tie bar, bracing bar, angle steel, roof & wall support).
3. Roof and Wall Materials: 75mm Glasswool sandwich panel
4. Door: Electric rolling up door
5. Window: Aluminium alloy sliding window
Advantage of steel structure building:
1. Steel has a high strength/weight ratio. Thus, the dead weight of steel structures is relatively small. This property makes steel a very attractive and popular structural material around the world Speed of erection. Steel structures can be erected quite rapidly. This normally results in quicker economic payoff. 
2. Quality of construction. Steel structures can be built with high-quality workmanship and narrow tolerances Ease of repair. Steel structures in general can be repaired quickly and easily
3. Adaptation of prefabrication. Steel Structure is highly suitable for prefabrication and mass production 



Project 2: Steel structure Fangtai Gold Mine Project
1. Total area is approximately 20,000 square  meter, especially with a 24-meter-high refining workshop.
2. With strong corrosion resistance, it completely meets the needs of the company.
3. The technology of de-rusting and spray paint of our group reaches domestic leading level.




Project 3: Steel Structure Workshop in South:
Size:L 250m*W25m*H12m
1. The Primary Steel Structure: Lattice Column+ Welded H Beam with epoxy white painting, which will be bolted together at site;
2. The Secondary Framing: C Purlin, Tie Bar, Roof and Wall Support are formed as secondary framing with epoxy white painting;
3.  Bracing: Round steel is supplied with knee bracing (made by angle steel) and other supporting parts, which will improve the stability and durability of the whole structural building;
4. Roof & Wall Cladding: Single Corrugated Steel Sheet, Thickness=0.5mm, covered by transparent sheet on the length direction;
5. Lifting weight of Crane: 30T
6. Window: Aluminium-alloy Sliding Window
7. Door: Rolling Shutter



Project 4: Steel structure Exhibition hall in Angola Area:9654sqm

Main steel structure (columns and beams)	1.Steel Q345(S355JR) or Q235(S235JR) H shape 2. Straight cross-section or Variable cross-section
Sub steel structure	1.Material Q235(S235JR) steel 2.Bolt connections. Anti-rust painted or galvanized 3. Brcaings:X-type or V-type or other type bracing made from angle, round pipe, etc 4. Purlins:C or Z type: Size from C120~C320, Z100~Z200
Roof	Sandwich panel(PU/EPS/fiberglass/rook wool) or Colorful steel tile
Wall	Sandwich panel(PU/EPS/fiberglass/rook wool) or Colorful steel tile
Doors	Steel rolling shutter or others
Windows	Alu. Alloy window,or others
Edge Cover	Steel sheet 0.5mm thinckness
Bolts	M24,M22,M16 embedded bolts,intensive bolts,galvanized ordinary bolts,high-strength bolts, etc
Others options	Daylighting panel,Roof ventilator,Down pipe,Galvanized,Crane,sanitary Products, etc
Foundation	Cement and steel foundation bolts

FAQ:

1. What kind of company you are?
We are steel structure building Manufacturer located in Qingdao China, We were gaining good reputation among our customers for our professional, warm and thoughtful service. Because we know that a long terms business based on the quality control, price, packing, delivery time etc.
 
2. Does your company is a factory or trade company?
We are factory, so you will enjoy the best price and competitive price. Our factory covers an area of 150,000 square meters.
 
3. Whats the quality assurance you provided and how do you control quality ?
Established a procedure to check products at all stages of the manufacturing process - raw materials, in process materials, validated or tested materials, finished goods, etc.
 
4. Can you offer designing service?
Yes, we have more than 100 design engineers. We could design full solution drawings as per your requirments. They use software: Auto CAD,PKPM, MTS, 3D3S, Tarch, Tekla Structures(Xsteel)V12.0.etc.
 
5. Do you offer guiding installation on site overseas?
Yes, we can provide the service of installation, supervision and training by extra. We can send our professional technical engineer to surpervise installation on site overseas. Besides, We also have our own abroad guiding installation team consisting of more than 30 people. 
They have succeeded in many countries, such as Malawei, Dubai, South Africa, Algerial, Ghana, Gabon, Tajikistan, Burkina Faso, Panama, Australia.
 

We would be appreciated if you can reply me to talk more details.We will design and quote for  you immediately after receiving your feedback. Welcome you send to me your enquiry as below blank: