Prefab Galvanized Steel Frame Structure Metal Barn Growing Chicken House in Kenya

• Customization: Available
• After-sales Service: 10 Year Limited Warranty
• Size: According to The Need of Design
• Model NO.: KXD001
• Wall and Roof Sandwich Panel: Color Steel Sheet or Sandwich Panel
• Grade: Q235B
• Main Steel Frame: H Steel, Z or C Purlin
• Window: Aluminium Alloy or PVC Window
• Door: Sliding Door or PVC Door
• Connect Method: Welding or Bolt
• Steel: High Strength Steel
• Material: Steel Structure
• Certification: ISO, CE, SGS, BV
• Customized: Customized
• Warranty: 30 Year Limited Warranty
• Transport Package: Standard Package
• Specification: GB
• Trademark: kxd
• Origin: Qingdao, China
• HS Code: 9406900090
• Production Capacity: 100 Sets Per Month
• Package Size: 1200.00cm * 230.00cm * 230.00cm
• Package Gross Weight: 27.000kg

Product Description

 Brief Introduction of Poultry House

Main Structure
(Steel tube truss system)we adopt hot-dip galvanizing C section or steel tube truss beam to reduce self-weight of design load and dosage of the steel. At the same time, hot-dip galvanized can widely improve anti-corrosion of the steel. (The construction cycle of the steel structure work is short, which reduces the cost of the project effectively. The steel structure has strong shock resistance and can improve the comprehensive anti-seismic property of the whole house).


Substructure(Cold-formed thin-walled steel)
 Roof purlin uses the hot-dip galvanized Z or C section. The way to continuous lap makes the steel frame as whole. Roof purlin uses the hot-dip galvanized C section steel. All components adopt bolted connection, no welding, which makes the structure overall appearance smooth.


Protecting system
 In order to satisfy the protecting material for 20 years, the outside roof is 0.5 mm aluminum zinc color steel plate. To prevent dewing phenomenon, 50 mm aluminum foil glass wool is laid at the bottom of the roof plate (can be customized according to the climatic conditions). To prevent sagging of the fiber wool, the wire mesh is added, which effectively improve the utilization rate of the glass wool insulation and moisture proof. To add ceiling panels below steel trusses and the ceiling panels laid horizontally is composite color plate, which not only improves the overall stability of steel trusses, but also plays a very good thermal insulation effect. The inside and outside walls laid horizontally is hot-dip galvanized color steel plate, which are all used self-tapping screw to connect into a whole, effectively increasing the lateral stability of steel columns. The indoor humidity is relatively large, so a layer of plastic film is added in order to prevent moisture from entering the fiber glass wool.

Basic rules of structure design
1. Design code for steel structure GB50017-2003;
2. Design Specification for Curved Thin-walled Steel Structure GB50018-2002.

Design parameters
 1. Coefficient for importance of a structure is 0.95. The usage life is 25 years;
 2. 3 security level;
 3. Seismic fortification categories: C-class;
 4. Earthquake-resistant level: the main structure is level four.

Structural design load
Uniformly distributed load standard values:KN/m2
1. YX-980 0.5mm outsider roof aluminum-zinc steel plate: 0.049KN/m2;
2. 16kg/m3 50mm heat-insulating fiber glass wool: 0.008 KN/m2;
3. Z or C roof purlin: 0.034 KN/m2;
4.Roof live load: 0.5 KN/m2.

Concentrated load:KN/m2(3mis a lifting point)
 1. Waterline : 0.11 KN/m2;
 2. Feed line : 0.22 KN/m2;
 3. Motor(the end of waterline and feed line): 0.41 KN/m2; 
 4. Full load of hopper : 1 KN/m2;
 5. Main feed line : 0.18 KN/m2;
 6. Wind load : 0.6 KN/m2;
 7. Snow load : 0.5 KN/m2.

Material
Load-bearing structural steel (steel column, steel beam) usually adopt Q235 and Q345. According to machinery performance and chemical composition, Steel should be Q235B which conforms to the requirement of current national standard high strength low alloy structural steel (GB/T1591-94) and (GB1591-88).
The ration of the steel tensile strength and yield strength measured value should not be less than 1.25, and there is obvious yield level. Elongation should be more than 20%, and has good weld ability and qualified impact toughness.
 

Material List for Prefab Steel Structure Poultry House
Foundation	Anchor bolts		Canopy	steel frame + steel sheet
Column	H section steel		Roof cladding	EPS sandwich panel
	Tubular pillar			PU sandwich panel
	Lattice column			Rockwool sandwich panel
	Cross column			Corrugated steel sheet
	Box column			Skylight panel
Beam	H section steel			Ventilator
	Lattice beam		Wall cladding	EPS sandwich panel
	Pipe truss			PU sandwich panel
	Space frame			Rockwool sandwich panel
Roof purlin	C section steel			Corrugated steel sheet
	Z section steel		Mezzanine	Decking floor
Wall purlin	C section steel			Checkered steel plate
Tie bar	Steel pipes		Insulation	Fiber glass wool
Roof bracing	Angle steel		Fasteners	High strength bolts
	Steel pipes			Common bolts
Column bracing	Angle steel			Expansion bolts
	Steel pipes		Accessories	Flashing
Pulling strap	Steel round bar			Trim
Sleeves	Steel pipes			Gutter
Knee bracing	Angle steel			Down pipe

 

FAQ
 
1. What kind of company you are?
We are steel structure building Manufacturer located in Qingdao China, We were gaining good reputation among our customers for our professional, warm and thoughtful service. Because we know that a long terms business based on the quality control, price, packing, delivery time etc.

 2. Does your company is a factory or trade company?
We are factory, so you will enjoy the best price and competitive price. Our factory covers an area of 150,000 square meters.

3. Whats the quality assurance you provided and how do you control quality ?
Established a procedure to check products at all stages of the manufacturing process - raw materials, in process materials, validated or tested materials, finished goods, etc.

4. Can you offer designing service?
Yes, we have more than 100 design engineers. We could design full solution drawings as per your requirments. They use software: Auto CAD,PKPM, MTS, 3D3S, Tarch, Tekla Structures(X steel)V12.0.etc.

5. Do you offer guiding installation on site overseas?
Yes, we can provide the service of installation, supervision and training by extra. We can send our professional technical engineer to surpervise installation on site overseas. Besides, We also have our own abroad guiding installation team consisting of more than 30 people.