Steel structure workshop Construction & Installation
The load bearing parts for construction steel structure are mainly steel structures, including steel columns, steel beams, steel structural basements, bracing systems for wall and roof. Steel workshops are divided into Light Steel Workshops and Heavy Steel Workshops. The Main Structure are usually made of Q345 Steel while the Purlins and Bracing System are made of Q235 Steel. They are the most common steel materials used for steel structure in China.
Advantages of Steel Structural Workshop:
1).Large span for great strength with light deadweight;
2).Short finishing time and low cost;
3).Fire proof and rust proof;
4).Convenient to assemble or disassemble.
1.Main Structure: Steel Welded H Section
2.Purlin: C Section Channel or Z Section Channel
3.Roof Cladding: Sandwich Panel or Corrugated Steel Sheet with Fiber Glass Wool. 4.Wall Cladding: Sandwich Panel or Corrugated Steel Sheet
5.Tie Rod: Circular Steel Tube
6.Brace: Round BarBrief introduction:
Steel structure warehouse/workshops/buildings is formed by the main steel framework like
H-section, Z-section, and U-section steel components, roof and walls using a variety of panels and other components such as
windows and doors. Light steel structure building is widely used in warehouses, workshops, large
factories, and so on.
The steel structure warehouse and plant can be used for office, factory, meeting room, dormitory,
shop, exhibition center, outdoor building. In the fields of building, railway, highway, water
conservancy project, electric power, business, tourism and military use. The movable workshops
are all air-tight, heat-tight, warm-keeping, water-proof and anti-corrosive.
1. The main frame (columns and beams) is made of welded H-style steel.
2. The columns are connected with the foundation by pre-embedding anchor bolt.
3. The beams and columns, beams and beams are connected with high intensity bolts.
4. The envelop construction net is made of cold form C-style purlin.
5. The wall and roof are made of color steel board or color steel sandwich panels, which are
connected with the purlin by Self-tapping nails.
6. Doors and windows can be designed at anywhere which can be made into normal type, sliding
type or roll up type with material of PVC, metal, alloy aluminum, sandwich panel and so on.
Windows and Doors:
2.walk in door
3.sandwich panel sliding door
|Opinions||1)We can supply all kinds of steel structures, steel building, metal building, modular house, container house steel frame for warehouse, workshop, garage etc, steel beams, other riveting and welding parts.|
|2)We can also make and develop new parts according to customers' drawings and detailed dimensions.|
|1)Size: MOQ is 100m2, width X length X eave height, roof slope|
|2)Type: Single slope, double slope, muti slope; Single span, double-span, Multi-span, single floor, double floors!|
|3) Base: Cement and steel foundation bolts|
|4) Column and beam: Material Q345(S355JR)or Q235(S235JR) steel, all bolts connection! Straight cross-section or Variable cross-section!|
|5) Bracing: X-type or V-type or other type bracing made from angle, round pipe, etc |
|6) C or z purlin: Size from C120~C320, Z100~Z200|
|7) Roof and wall panel: Single colorfull corrugated steel sheet0.326~0.8mm thick, (1150mm wide), or sandwich panel with EPS, ROCK WOOL, PU etc insulation thickness around 50mm~100mm,|
|8)Accessories: Semi-transparent skylight belts, Ventilators, down pipe, Glavanized gutter, etc|
|9)Surface: Two lays of Anti-rust Painting! |
|10) Packing: Main steel frame without packing load in 40' OT, roof and wall panel load in 40' HQ! |
|3. Design Parameters||If you need we design for you, pls supply us the following parameter together with detail size: |
|1)Live load on roof(KN/M2) |
|3)Snow load (KG/M2)|
|4)Earthquake load if have|
5) Demands for doors and windows
|6)Crane (if have), Crane span, crane lift height, max lift capacity, max wheel pressure and min wheel pressure!|